Connecting Cable - 0.3m (11.81") conveyor Ergonomic design requires no physical

Ergonomic design requires no physical pressure to operate and eases stress on the hands and wrists

This part may be compatible with later version WGC-50/100/250 seamers

This tool is handy when adjusting the Standoff Retention Nut or touching off roller height

Ingress Protection: IP65 Protection available using special input seals

Mount these supports to a surface from either the top or bottom using the unthreaded holes

Connecting Cable - 0.3m (11.81") conveyor Ergonomic design requires no physicalThis four pin connecting cable is 0. 3 m (11. 81 in) and is used with all Fusion systems. It has a molded straight M8x1 threaded male connection on one end and a straight M8x1 threaded female connection on the other. For power supply Suitable for energy chains Specs: DC operating voltage range: 0 V 30 V Nominal operating voltage DC: 24 V Operating voltage range AC: 0 V 30 V Nominal operating voltage AC: 24 V Current rating at 40 C: 5. 2 A Surge