black rear shock absorbers honda cl250 cl 250 1981 1984 Aprilia This set of shocks have

This set of shocks have a 23mm shaft

This set of steering stem bearings has been manufactured to replace the original taper or ball bearings on a DR125 for the years and models shown above

This coil has been manufactured to be an upgrade on 21121-1056 for a KDX250 B1-B4 models

This set of head stock bearings are taper roller style bearings that have been manufactured to replace the original set of steering bearings 93399-99931 and 93399-99932 on a Yamaha MT 01 / MT-01 1670cc for the years and models shown above

This high performance ignition coil with spark plug cap has been manufactured to upgrade the original coil 33410-01X50 or 33410-19B00 on an LTF 4WD 250cc quad L to W models

black rear shock absorbers honda cl250 cl 250 1981 1984 Aprilia This set of shocks haveBrand new set of black rear shock absorbers to fit: Honda CL 250 SC (1981 1984). This set of rear shocks is designed to replace the original factory shocks on a Honda CL250 for the years and models shown above. It has 325mm pin pin mounting points and a 40mm shroud. The top pin is 14mm, the bottom is 10mm (You may need to change these to the required sizes spare bush's sold separately in 2 x 10mm 12mm 14mm kits). The shocks are black which can be seen