headstock bearings and seals yamaha it125 it 125 1980 1984 Honda CB1300 30502-ME7-000

30502-ME7-000

with both pins/bushes being 12mm

Top and bottom headstock bearings to fit:

This ignition coil set has been manufactured to replace the original coil packs on a Honda XL1000 for the years and models shown above

Brand new set of front left and right brake pads to fit:

headstock bearings and seals yamaha it125 it 125 1980 1984 Honda CB1300 30502-ME7-000Brand new set of headstock steering bearings and seals to fit: Yamaha IT 125 (1980 1984). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha IT125 for the years and models shown above. Top sized: 25mm x 43mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. The seal thickness is