Foam Panel Tape (5mm wide/3mm thick) Prusa Mini+ - Reservedel It is supported for dual

It is supported for dual extrusion with:

Lightweight cable with digital temperature measurement

blæsere osv

75mm Nozzle Temperature Max 300ºC Open Filament System Yes Extruder Type direct drive Printing Speed ​​Max 150 mm/s (depends on material)) Build Area 240mm x 330mm x 240mm Dual Build Area 240mm x 295mm x 240mm Build Plate Temp Max 110ºC Surface of the building board BuildThanks Build Plate Material Flexible Steel Plate Build Plate Attachment magnetic Build Plate Leveling System Mesh-leveling with Flatness Detection Build Chamber During Process Open or Closed Filament Chamber Closed Yes Extruder Number Of 2 Extruder Construction Type Dual IDEX - Independent Dual Extruders Installation Space / Requirements Total Mass 596mm x 607mm x 465mm Total Weight 35 kg Operating Ambient Temperature 15°C - 30°C Max Power Consumption 350W Voltage AC: 100 V

This glass plate eliminates the problems of uneven build surfaces and is easy to clean and maintain

Foam Panel Tape (5mm wide/3mm thick) Prusa Mini+ - Reservedel It is supported for dualFoam Panel Tape for optimization during the 3D printing process Foam tape with acrylic adhesive on both sides. Suitable for indoor and outdoor use. The tape is resistant to water and UV, and has a long service life. It has good adhesion to most materials. 3mm thick and 5mm wide 10 meters The construction compensates for the thermal expansion of different materials.