TPM - Wash Solvent - 10L Pellets 05 mm🔹 Produktionshastighed op til:

05 mm🔹 Produktionshastighed op til: 200 mm/s

And no more pretreatments such as hairspray or acetone slurry

5x ekstra endestopindgange med indikatorlysdioder og 3

To straighten your object during printing and to avoid twisting

* 1 x 2 * 4 white Teflon tube

TPM - Wash Solvent - 10L Pellets 05 mm🔹 Produktionshastighed op til:Wash Solvent TPM Wash Solvent (Tripropylene glycol monomethyl ether) is a non flammable, low odor solvent that can be used to clean and dissolve uncured resin on SLA DLP 3D printed parts. TPM has a lower evaporation rate than IPA and washes about three times as many parts as IPA before it needs to be replaced. * Compatible with Formlabs Finish Kit, Form Wash and Form Cure * 10 litres ! ATTENTION ! TPM is not currently certified for use with Formlabs