USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi Shipping:1 day These pads include 5V and

These pads include 5V and ground

com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library) to make reading and controlling the GPS-RTK-SMA over our [Qwiic Connect System]( https://www

USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch

if you didn't have this ultra-cool TCA9548A 1-to-8 I2C multiplexer

The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi Shipping:1 day These pads include 5V andThe cable is the easiest way ever to connect to your microcontroller Raspberry Pi WiFi router serial console port. Inside the big USB plug is a USB< >Serial conversion chip and at the end of the 36" cable are four wires red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX TX pins are 3. 3V level for interfacing with the most common 3. 3V logic level